Description

CPVC is a new type of engineering plastic with broad application prospects. The resin is obtained by chlorination modification of polyvinyl chloride (PVC) resin, which is a new type of engineering plastic. The CPVC Socket Fittings is white or light yellow odorless, odorless, non-toxic loose granules or powder. After the PVC resin is chlorinated, the irregularity of molecular bonds and the polarity increase, which increases the solubility of the resin and increases the chemical stability, thereby improving the heat resistance, acid, alkali, salt, oxidant, etc. of the material. corrosion. The mechanical properties of the heat distortion temperature of the resin are improved, the chlorine content is increased from 56.7 percent to 63-69 percent , the Vicat softening temperature is increased from 72-82 degree to 90-125 degree , the maximum service temperature can reach 110 degree , and it can be used for a long time. The temperature is 95 degree .

Storage and Transportation

This CPVC Socket Fittings should be stored in a dry and ventilated warehouse with a stacking height of no more than 12 bags to prevent sunlight and moisture. Transportation must be carried out in clean and covered means of transport, protected from sunlight, rain and heat. This product is non-toxic and non-dangerous.

Difference

1. The raw materials are different

Although UPVC pipes and pvc pipes are all made of polymer polyvinyl chloride, the internal structure of pvc plastic pipes is made of plasticizers and phthalates, which are all odorless and colorless esters, which can be reasonably Strong overall flexibility. The UPVC management method does not use this plasticizer, nor does it contain the BPA of the pvc pipe.

2. The characteristics are different

Because the raw materials used are different, this also leads to differences in the characteristics of UPVC pipes and pvc pipes. UPVC pipe is a kind of raw material with light quality and strong corrosion resistance. It can resist the corrosion of corrosive salt and oil medium, so the water conservancy conditions are extremely strong, but it cannot bear the impact. The pvc pipe is a new type of drainage pipe with smooth inner wall and vertical reinforcing ribs on the outer wall, which is not easy to age and is suitable for residential drainage systems.

3. The main uses are different

UPVC pipe is used for water supply and drainage of buildings and sewage pipes. It is very convenient to install and can be installed with flanges and corresponding kits. There are no restrictions on engineering construction, so the scope of application is relatively wide. The PVC plastic pipe is mainly used for water supply and drainage in buildings. It is a hot-melting method, and it also uses viscose, but it is not easy to construct in winter.

UPVC

Popularne Tagi: cpvc gniazdo armatura